12 Best Saw for Cutting Laminate Flooring [2022 Update]

The best laminate flooring saw is determined by the type of cuts you intend to make. For example, straight cuts are better made with circular and table saws, whereas hand saws are suitable for small cuts. Similarly, a jigsaw may be sufficient for curved cuts.

Ideally, laminate flooring saws should have as many teeth per inch as possible.

In this post, we’ll go over the various types of saws available, review some of the best ones, and highlight crucial aspects to consider before making your final purchasing decision.

The type of saw you use will determine the overall quality and longevity of your floor. For those of you who are on the run, these are my top 3 recommendations:

Which Saw Blade Is Suitable to Cut Laminate Flooring?

Saw blades have a huge impact on the quality and accuracy of your cuts when it comes to cutting laminate flooring. In general, carbide-tipped blades are optimal for making clean, precise cuts in wood and laminates.

With that said, there are several factors that you should consider when choosing a saw blade, such as:

• Number of teeth per inch (TPI)
• Type of kerf
• Gullet size
• Plate thickness

Number of Teeth per Inch

The number of teeth on a saw blade is one of the most important factors to consider. More teeth will result in smoother finishes and faster cuts, whereas fewer teeth will make rougher edges. Generally speaking, blades with higher TPI numbers are best suited for thinner wood (e.g., laminate flooring).

Type of Kerf

The kerf is the width of the blade and determines how much material you will remove with each cut. For example, blades with a narrow kerf are recommended for laminate flooring, as they produce less tear-out and result in a smoother finish.

Gullet Size

The gullet size of a saw blade refers to the space between the teeth. Larger gullets can handle more debris, which is ideal for cutting thicker materials (e.g., lumber). On the other hand, smaller gullets are better suited for thinner wood and produce less tear-out.

Plate Thickness

The plate thickness of a saw blade is another important factor to consider.  For cutting heavy materials, a thicker plate can help prevent bowing and warping over time. On the other hand, thinner plates are best for light materials that do not require as much support.

Factors to Consider When Buying a Saw for Laminate Flooring

Now that we’ve gone over some of the most important aspects to consider when choosing a saw blade, let’s take a look at a few factors you should keep in mind when purchasing a saw for laminate flooring.

Type of Saw

With so many choices, the best saw for you will be determined by the types of cuts you want to make. The best tools for straight cuts are circular saws and table saws. Jigsaws, on the other hand, are the finest option for difficult cut-outs around doorjambs and pipes.

Keep in mind that using a circular saw to make long cuts will produce more tear-out than other types of blades.

Speed

The speed at which the blade spins is another critical factor to consider. A higher speed will result in cleaner cuts, but it will also produce more heat and increase the risk of kickback.

As a general rule of thumb, the ideal speed of a saw for cutting laminate flooring is between 4,000 and 8,000 RPM.

Portability

To avoid the inconvenience of unnecessary lugging, it’s better to cut the laminate boards at the time of installation. As a result, while you’ll need a powerful saw to produce precise cuts, you should also look for one that’s simple to set up and easy to carry around.

Cutting Depth 

Some saws can produce cuts of up to 1 inch, while others are limited to around 3/4 inch. When it comes to cutting laminate flooring, a powerful and well-built saw is essential for producing clean and precise edges with minimal effort.

Blade Change System

Most saws will come with either a tool-less or hex key blade changing system. The former is much easier to use and reduces the risk of injury, while the latter is more secure and can be used to make precise adjustments.

Remember you may need to exchange blades or buy the ones with a lot of teeth. As a result, always double-check the blade type on the saw before using it to cut laminate.

Extra Features

Some saws come with extra features to make them more convenient. You may, for example, buy a table saw with an extensible table or a cordless jigsaw.

Best Saw for Cutting Laminate Flooring

Finding the right saw for your job can be a bit tedious. There are chances of getting the wrong one, especially when you’re new to this area

But don’t worry, I’ve compiled a list of the best saws to make your search easier. Below are my 12 recommendations:

1.  SKIL 3601-02 Flooring Saw With 36T Contractor Blade

• Number of Teeth: 50
• Speed: 7.0 AMP
• Power Source: Corded Electric
• Accessories: Aluminum fence, 36 teeth blade (carbide tipped), dust bag, vertical clamp

The SKIL 3601-02 Flooring Saw is an excellent choice for those who are looking for a reliable and easy-to-use tool for cutting laminate flooring.

This product includes a powerful 7-Amp motor that can handle even the toughest jobs. The 50 teeth carbide-tipped blade is ideal for making fast, smooth cuts in wood, laminate, plastic, and other materials.

This saw has a compact size, you can easily set it up in the room you’re working on and cut the laminate boards as you go. 

In addition, it can make beautiful miter cuts at a variety of angles, making your laminate cutting work simple and fun.

TIP: If the dust collector bag doesn't work well, attach a shop vac. It will make the process even cleaner and more efficient.

Pros 

• High-speed motor –  ideal for cutting laminate and hardwood
• Lightweight – easy to set up and use
• Die-case rip fence and aluminum miter
• Suitable for making rip, cross, and miter cuts
• Features miter detents at three angles i.e 0, 22.5 and 45 degree

Cons 

• Not ideal for cutting wide boards
• The blade has a limited lifetime – you may have to replace it after some time

2. Black + Decker Jigsaw

• Number of Teeth: 10
• Power Source: Corded Electric
• Speed: 5.0 AMP
• Type: Jigsaw
• Blade Size: 3/4 Inch

What I love about this saw is the adjustable shoe and rubber handle which makes this jigsaw easy to follow curves and cuts through thick materials with ease.

The Black + Decker Jigsaw is also one of the most lightweight and compact saws you can find, making it perfect for tight spaces and long projects.

You can adjust the orbit in one of four customized settings, so no matter what project you’re working on, this saw has got you covered.

Plus, with its variable-speed motor, you can generate up to 3,000 SPM (strokes per minute) of cutting power – more than enough for even the most stubborn materials.

Pros 

• Easy blade change – no need for screws
• More control – 4 custom orbital settings
• Portable – easy to carry around
• Comes with a wire guard
• Affordable

Cons 

• Best for DIY but not recommended for heavy use – the blade screws may come loose

3. Rockwell BladeRunner RK7323 Table Saw

• Number of Teeth: 50
• Power Source: Battery Powered
• Length: 4 Inches
• Accessories: 5 assorted blades, miter gauge, rip fence

This corded electric saw is simple to set up and features an ergonomic built-in handle for convenient transportation around the job site. With a riving knife system and a standard guard, you can perform cross, scroll, miter, and rip cuts with the Rockwell Bladerunner X2 Tabletop Saw.

This high-quality tabletop saw includes an adjustable gauge to assist you in making perfect mitre cuts up to 60 degrees. Moreover, this saw has a spacious base that makes it easy to store the rip fence, mitre gauge, and extra blades while they’re not in use.

What I love about this saw is the existence of a safety switch that prevents the item from accidentally turning on. Furthermore, the vacuum port lets you hook up shop vac to keep the area clean as you cut the laminate.

Similarly, if you’re working on multiple projects and would like to change blades, the product’s tool-free blade change and compatibility with standard 4′′ (10cm) T-shank blades from any manufacturer will make life easier.

Pros 

• Multi-purpose saw cutter – works with wood, laminate, plastic and metal
• Allows you to attach a vacuum for a dust-free process
• Perfect for rip, diagonal and straight cuts
• Includes 3 years limited warranty
• Portable, lightweight and compact

Cons 

• The unit vibrates while working – you’ll need to secure it
• The speed isn’t adjustable
• A bit loud

4. Metabo HPT 10-Inch Compound Miter Saw

• Speed: 15 amp or 5000 rpm
• Length: 10 inch
• Power Source: Corded Electric
• Type: Miter Saw
• Accessories: Dust Bag, Holder, Hex Bar Wrench, Vice Assembly

Looking for a powerful and reliable saw to cut laminate flooring? The Metabo HPT 10-inch compound miter saw is an excellent option. With its 15 amp motor, it can deliver up to 5,000 RPM of speed, making it ideal for cutting through even the toughest materials.

In addition, it features an adjustable fence and a tall base extension for accurate cuts. It also comes with a dust bag, holder, hex bar wrench, vice assembly and 10-inch 60-tooth saw blade for added convenience.

I love how this saw is compact and lightweight, yet it still has all the power I need to get the job done quickly and efficiently. If you’re a homeowner with little to no experience and looking for an affordable miter saw, the Metabo HPT is definitely worth considering.

Pros 

• 5 Year Warranty
• Lightweight, easy to assemble and work with – suitable for beginners
• Large table offers better material support

Cons 

• The saw material is a bit cheap which serves the price

5. Norske NMAP001  Laminate Flooring and Siding Cutter 

• Weight: 13 Pounds
• Power Source: Hand operated
• Material: Steel & Aluminium 

If you’re looking for an affordable yet powerful saw to cut through flooring and siding, the Norske NMAP001 is one of your best bets.

This laminate flooring and siding cutter feature a high-quality steel blade that can cut through wood, rubber, plastic, aluminum and most other materials with ease.

What I really like about this saw is that it is hand-operated, making it easy to control and work with. Unlike high-speed electric saw, this feature allows for less risk of safety hazards.

Additionally, it is portable – that means no more running between the garage and work area every few seconds to make new cuts.

Moreover, it also comes with a durable aluminum base plate and anti-slip rubber handle grips for added comfort and stability.

Pros 

• Noise and dust-free saw cutter
• Smooth & precise cuts – no splinters or chipping
• No electricity required
• Marks for angled (15, 30, 45 degrees) cuts

Cons 

• Need to assemble before use (the manual might be a little difficult to understand)

• High-speed motor –  ideal for cutting laminate and hardwood
• Lightweight – easy to set up and use
• Die-case rip fence and aluminum miter
• Suitable for making rip, cross, and miter cuts
• Features miter detents at three angles i.e 0, 22.5 and 45 degree

6. Rockwell RK344OK Versacut Ultra-Compact Circular Saw With Laser Guide

• Speed: 3500 RPM
• Power Source: Corded ELectric
• Accessories: 3 Blade Kit, Laser Guide, vacuum adapter, and carry case

If you’re looking for a versatile, compact saw that can handle a variety of cutting tasks, including laminate, metal sheets, wood, and tile, then the Versacut is a great option.

Despite its small size, it stands out for its rapid speed (3500 RPM).  The laser guide ensures that your cuts are precise, while the 3-blade kit allows you to tackle different materials.

The saw also comes with a dust adapter that can be attached to a vacuum cleaner for a clean working environment. What I love about this saw is the presence of a narrow grip handle that gives added comfort to your hand, allowing you to make precise cuts.

In addition, it has a built-in LED light that illuminates the cutting area and makes it easier to see the line you’re cutting.

Pros 

• Comes with a built-in laser to act as a guide when cutting
• Pivoting metal guard ensures safe and smooth plunge cuts
• Features a dust extraction adapter that keeps dust away from the cut line
• The ergonomic handle allows for enhanced grip and control
• Versatile (as it can cut laminate, plastics, metal, and tile)

Cons 

• Not ideal for large projects
• You need to replace laser batteries after some time

 7. Dewalt Sliding Compound Miter Saw

• Power Source: Corded Electric
• Length: 12 Inch
• Speed: 3800 RPM
• Accessories: 12-inch carbide blade, dust bag, material clamp

The Dewalt Sliding Compound Miter Saw is a great choice for those who need to make precision cuts in laminate, wood, and other materials.

The cam lock miter handle with detents at 0, 15, 22.5, 31.6, and 45 degrees make it easy to create precise miter cuts. The 12-inch carbide blade is ideal for achieving a neat finish on the boards.

In addition, it has a tall sliding fence that allows you to make cuts in larger pieces of lumber. The dust bag helps to collect the sawdust, while the material clamp holds the workpiece securely in place.

Furthermore, the angles can be adjusted up to 45 degrees to the left and right, making it easy to cut bevelled edges.

Pros 

• Comes with a 3-year warranty
• Efficient dust collection mechanism
• Cuts at 90 degrees and 45 degrees
• Comes with accessories like LED and laser cutting guide sold on the side
• Easy to use –  the bevel and miter adjustments are straightforward
• Has a powerful motor that cuts through different materials easily
• Ideal for cutting laminate and other materials

Cons 

• The saw is a bit heavy, so it’s not easy to move around
• Only comes with one blade: you’ll need to buy other blades separately

8. Bullet Tools ES00-1113 13″ Laminate Flooring Cutter

• Power Source: Manual
• Length: 13 Inch
• Accessories: Cutting Blade, Extension Arm, Carrying Case

If you’re looking for an easy-to-use and manual laminate cutter,  then the Bullet Tools ES00-1113 is a great choice.

It’s a handheld cutter that can be used to cut laminate, engineered wood, and vinyl plank flooring. The 13-inch blade is made of high-carbon steel for durability and can make clean, precise cuts.  Plus, with just one shear blade, you can outlast over 20 saw blades

One of the best features of the saw is the robust design: a comfortable grip handle that makes it easy to hold and control. The carrying case is also included so you can easily transport the cutter from one job site to another.

Pros 

• One year warranty
• Noise and dust-free
• Powerful blade – perfect for hardwood floors
• Movable fence – allows making 45 and 90-degree cuts
• Comes with a built-in ruler
• Portable and easy to use – saves time and electricity
• High-quality material – Made in the USA

Cons 

• It’s a manual cutter, so it requires some effort to cut through the material

9. EAB Tool Exchange-a-Blade 2100005 9-inch Laminate Flooring Cutter

• Power Source: Manual
• Accessories: Honing stone, replacement blade

The EAB Laminate Flooring Cutter is suitable for cutting laminate, engineered flooring, and solid wood up to a thickness of 15 mm (5/8′′). Vinyl tiles and fibre cement siding can easily be cut with this handy saw.

Personally, I love the versatility of this highly portable hand saw, which can cut up to 9′′ (23 cm) broad. You may cut laminate up to 45 degrees using the angle gauge.

Also, since this laminate cutter isn’t powered by electricity, you won’t have to deal with the clutter that long electrical cords may cause. Furthermore, a sharpening stone is included in the kit for sharpening the blade when necessary.

In addition, the extendable handle is comfortable to grip and can withstand a lot of pressure. This means you can easily perform one-handed cuts for increased accuracy with this cutter.

Pros 

• Quiet operation
• Doesn’t emit dust
• The blade can be sharpened and even replaced
• Can manage up to 9″ (23 cm) wide cuts
• Perfect for cutting laminate, solid wood, and vinyl
• Ideal for DIYers and amateur floor installers

Cons 

• Doesn’t cut thick planks too well

10. Roberts 10-94 Multi-Floor Cutter

• Power Source: Manual
• Length: 10 Inch
• Accessories: Handle, Rip Fence, Cutting Blade, Instructions Manual

This Roberts’ guillotine-system floor cutter can cut laminate planks as broad as 13 mm (0.5 in) and as thick as 16 mm (0.6 in).  It’s perfect for cutting laminate, engineered hardwood, luxury vinyl plank, and WPC (wood plastic composite).

It has a long and extendable handle that increases cutting power while requiring less effort. Furthermore, this useful tool can handle 45-degree cuts thanks to the moveable guild.

What I like about this cutter is the blade which is made of tungsten steel. It helps in maintaining the edge well and is long-lasting. You’ll also appreciate the aluminum extruded base and the solid plastic surface that serves as a work surface.

Pros 

• Ideal for cutting engineered wood, LVT, and laminate flooring.
• It has a large enough cutting surface.
• The extra-long handle gives you more power with less effort.
• The blade is made of tungsten steel and is easily detachable.
• Lightweight and portable for easy transport

Cons 

• Can be a bit pricey for some people
• Not suitable for tough plastic, metal, and hardwood surfaces

11. MantisTol 13″ Laminate Flooring & Siding Cutter

• Power Source: Hand Powered
• Teeth: 6.5 teeth per inch
• Blade Length: 4mm
• Accessories: Honing stone, installation kit, tapping block and spacers

MantisTol’s cutter is extremely versatile, capable of cutting laminate, bamboo flooring, fibre-cement siding, LVT, LVP, SPC, VCT, WCT, vinyl flooring, and even deck-floor-boards.

With a heavy-duty steel and aluminum construction, this highly qualified cutter is known for making flooring installation easy for both professionals and amateurs alike. 

The device has a long handle that provides increased leverage with minimal effort, making cutting simple. Furthermore, using this cutter means you won’t have to worry about dust or unpleasant noises anymore.

Lastly, the package comes with a sharpening stone that can be used to keep the blade in top condition.

Pros 

• Lightweight and easy to use
• Multi-purpose cutter
• Comes with a sharpening stone, spacers and installation kit
• Long handle for increased leverage
• No battery required; noise and sawdust free

Cons 

• Not recommended for heavy projects
• Cannot cut wood lengthwise

12. TECCPO 6.5 Amp 3000 SPM Jig Saw with Laser

• Power Source: Corded Electric
• Number of Teeth: 10
• Speed: 3000 SPM

Accessories: 6 Replacement Blades, Ruler, Carry Case, Exhaust Pipe, User Manual

This TECCPO jigsaw is one of the best on the market, perfect for making curved and straight cuts. It also comes with a built-in laser guide that ensures accuracy while you work.

The 6.5 Amp motor gives you a no-load speed of 3000 SPM, making it perfect for even the most challenging projects. The package includes six different blades that can be used on a variety of materials, including wood, plastic, and metal.

What I like about this saw is the 6 variable speed triggers and 4 orbital settings that allow you to control the speed and cut quality. The dust blower is also a nice touch, keeping your work area clean and free from sawdust.

Additionally, the built-in laser guide and LED light make it easy to see your cutting line, even in low-light conditions.

Pros 

• Includes lock-on switch  for continuous use
• Has a powerful motor for challenging projects
• Comes with 6 blades for different materials
• The laser guide and LED light make it easy to see your cutting line
• Ergonomic design  for comfortable use
• Built-in transparent protective shield for safe use
• Quick and easy tool-free blade exchange

Cons 

• People with small hands may find the handle unpleasant
• Not recommended for making straight cuts

Best Saw Blade for Engineered Hardwood Flooring 

Whether you’re a professional installer or a do-it-yourselfer, having the right tools is essential for any job. When it comes to cutting engineered hardwood flooring, there are a few things you need to take into account.

First, you need to choose the right saw blade. Second, you need to make sure the blade is sharp. And third, you need to be careful not to damage the flooring.

There are a few different types of saw blades that can be used for cutting engineered hardwood flooring. The most common are circular saw blades, jigsaw blades, and hand saws.

The Main Features To Look In Saw Blades

Because of the laminate’s protective topcoat, cutting laminate floors requires particular blades. When looking for the best saw blade for cutting laminate floors, keep the following factors in mind:

• Blade Teeth

When cutting laminate, it’s recommended to use a blade with a lot of teeth to avoid jagged edges. Regardless of the type of saw you use, the goal is to utilize a blade with as many teeth as feasible. Generally, blades with over 100 teeth are ideal for neat and precise cuts.

• Blade Strength

It is strongly advised to use blades with carbide-tipped teeth. Such blades tend to hold up well against the hard surface of laminate flooring. However, despite their strength and toughness, carbide-tipped blades are prone to becoming blunt after frequent usage. Hence, it is recommended to keep extra blades on hand during the installation process.

• Cutting Depth

When cutting laminate floors, you need to make sure the blade can cut through the flooring and the underlayment in one go. For this reason, it’s important to choose a blade with a cutting depth that’s equal to or greater than the thickness of the laminate you’re using.

How Do I Cut Laminate Flooring Without Chipping the Edge?

Chipping is one of the most typical issues that arise when cutting laminate flooring. The absorbent inner layer of the flooring is exposed as a result.

In addition, chipping also allows spills to break down the flooring. That’s why properly cutting a laminate floor is crucial. You will significantly extend the life of the flooring.

When cutting laminate flooring, use the following procedure to avoid chipping:

• Step 1: Cover the side of the laminate floor that has been finished with low-tack masking tape. Also, avoid using conventional masking tape because its adhesive will stick to the laminate board and most likely ruin the finish.
• Step 2: Make a pencil mark on the side of the laminate plank where the wood is unfinished. Make sure it’s labelled with the appropriate cut length. Furthermore, mark the outlines of the required notches on the same side of the wood as well.
• Step 3: Place the board in the vice of a power miter box, making the taped side flat against the vice’s bottom. Make sure the cut mark is parallel to the power miter box’s blade. Twist the vice handle clockwise to secure the laminate plank in place. Then, start cutting through the board length and loosen the vice once you’re done.
• Step 4: Place the board on a solid worktable with the taped side facing downwards. Make sure one of the table’s edges is overhanging by the marked notch as you slide the plank. To keep the board in place, use two C-clamps. Remember to maintain a distance of at least 5 inches between the designated notch and the clamps.
• Step 5: Using a jigsaw, fasten a 30-teeth-per-inch jigsaw blade. Start cutting where the lines of the notch are perpendicular to the jigsaw and the edge of the plank. Slowly spin the jigsaw at a 90-degree angle and cut along the notch line that is parallel to the plank’s edge.
• Step 6: Lastly, sand all of the cut edges with 200-grit sandpaper, and remove the low-tack masking tape from the laminate plank’s face.

What Are the Main Types of Saws for Cutting Laminate Flooring?

Cutting laminate flooring is more difficult than cutting hardwood because of the thick plastic coating. Hence, using a random saw with insufficient teeth will likely chip the outer layer, producing unsightly edges.

So, what are some of the most common varieties of saws for laminate floors?

Miter Saw

Miter saws are excellent for cutting laminate floors. These saws are simple to use because all you have to do is mark the edges and the tool will do the rest. When cutting laminate, a miter saw can make spectacular 90-degree cuts or other angles up to 50 degrees, giving you much-needed versatility.

Although a sliding or non-sliding miter saw can be used, make sure the blade is large enough to cut the entire laminate (width) in one pass.

The Advantages of Miter Saw:

• Cutting laminate boards has never been easier or faster
• Multiple layered laminate boards can be readily sliced
• Maintain straight, attractive laminate cutting

The disadvantage of Miter Saw:

• Typically costly
• A board cannot be cut lengthwise
• The majority of models produce a lot of dust

How to Cut Vinyl Siding With Miter Saw –

Cutting vinyl siding with miter saw is not as difficult as it may seem at first glance. In fact, it’s quite easy once you get the hang of it.

Here’s a step-by-step guide on how to cut vinyl siding with miter saw:

1. Mark the cutting line on the vinyl siding using a pencil or chalk.
2. Set the miter saw to the appropriate angle.
3. Place the vinyl siding against the miter saw’s fence, making sure that the cutting line is aligned with the saw blade.
4. Slowly lower the saw blade into the vinyl siding and start cutting.
5. Once the cut is complete, lift the saw blade and remove the cut piece of vinyl siding.

Circular Saw

Circular saws are suitable for cutting parallel and perpendicular lines. They are, however, known for producing a lot of sawdust. To cut laminate flooring with a circular saw, you’ll generally need a sturdy work surface, such as plywood. Moreover, you’ll also need a square to offer direction for your cuts.

The advantages of circular saw: 

• Can cut in both parallel and perpendicular directions
• Quick and efficient
• Portable and simple to operate

The disadvantages of circular saw: 

• Known for producing a lot of dust
• Before making any cuts, you’ll need to mark the laminate boards.
• Can be quite loud

Table Saws

Table saws are perfect for rip cuts. You can simply cut the laminate flooring with a table saw without sacrificing precision. As a consequence, there aren’t many saws that can compete with table saws especially when it comes to cutting laminate boards lengthwise.

The advantages of a Table Saw: 

• The quickest way for ripping boards lengthwise
• Perfect for precise rip cuts

The disadvantages of Table Saw: 

• Extremely loud and generate a great deal of dust
• Crosscuts are difficult

Jigsaw

Jigsaws are great for specialty cuts, although they may also be used for rips and crosscuts. When compared to miter or circular saws, a jigsaw will cut at a slower rate. When cutting laminate in uneven places, however, it may be quite useful.

When undertaking massive laminate cutting jobs, a jigsaw is known to burn through numerous blades, notwithstanding its efficacy. Therefore, it’s best to use a fine-toothed blade and work with the exposed side up while cutting laminate flooring with a jigsaw.

The advantages of Jigsaw: 

• Among the safest wood cutting tools
• Easy to use
• Can cut in any shape or direction
• Usually quiet and less messy compared to other saws

The disadvantages of Jigsaw: 

• Among the slowest laminate or woodcutting tools
• Difficult to use when working on straight lines

Should I Use an Electric or Manual Saw?

The majority of the cutters on my list are electric, however, some are manual. I choose to present both of them in order to assist you to comprehend the distinctions between them.

Features of the Manual Saw

• It involves manual labour/physical force to operate it
• It has a long handle which helps you get enough strength to cut the laminates or other materials
• Can cause fatigue if used for too long
• No or less noise compared to an electric saw
• Less or no dust

Features of the Electric Saw

• Can be technical to operate and this may give beginners some problems
• Even though the blades generate a lot of noise, they cut the laminates very fast and do not require much effort from the operator

• You will be able to work much faster and longer when using an electric cutter
• Must for professionals and serious hobbyists

Related questions

Can You Cut Laminate Flooring With a Chop Saw?

Yes, you can cut laminate flooring with a chop saw. It is typically utilized for straight cuts with circular blades ranging from 8 to 12 inches in diameter.

Additionally, you can cut the material in a single motion using the chop saw. The fence will hold it stable under the blade, ensuring that every cut is precise. 

How Do I Know Which Saw Is the Easiest to Operate?

Some types need extensive knowledge and skills, while others are simple to use. Electric saws are typically the best when it comes to simplicity of use. You merely press a button and then guide the blade. Both manual and electric saws, however, require a basic understanding of how to use them.

Should I Buy a Saw With a Replaceable Blade?

Yes, you should buy a saw with a replaceable blade. That is because blades dull over time and will need to be replaced periodically. A saw with a replaceable blade will enable you to use the cutter for an extended period without having to purchase a new one.

What Saw Is Best for Straight Cuts?

The best saw for making straight cuts is the circular saw. It’s designed to make precise, linear cuts in lumber and plywood. The blade on a circular saw can be replaced when it becomes dull. Additionally, you can use a guide rail with a circular saw to ensure that your cuts are perfectly straight.

Can You Use a Miter Saw to Cut Vinyl Plank Flooring?

Yes, you can use a miter saw to cut vinyl plank flooring. You’ll need to use a blade with at least 60 teeth for clean cuts. Make sure that the blade is sharp and installed correctly before cutting.

Which Saw Is Suitable for Curve Cutting?

The best saw for curve cutting is the jigsaw. It has a small, sharp blade that can be easily maneuverable to make curved cuts. Additionally, you can use different blades with a jigsaw to create different effects.

Read next:

• Laminate flooring buying guide
• How to Clean your Laminate floors?
• 10 best Underlayment for laminate floors
• Is Laminate Flooring Waterproof or water-resistant?
• How to Install Laminate Flooring in an RV With Slide-Outs
• Can you cut vinyl flooring with a miter saw?