Skip to content
Home » Shower Valve Height – Guide to Right Shower Fittings

Shower Valve Height – Guide to Right Shower Fittings

This page contains affiliate links, As an Amazon Associate, I earn from qualifying purchases (with no extra cost to you). Learn more

Incorrect shower valve height increases your risk of slipping in the bathroom and promotes numerous other mishaps. If you live with children or the elderly, this is especially concerning. It is harder to choose the ideal shower valve height than install it.

The shower valve should be positioned at a comfortable height for effortless use. Experts often advise placing the shower valve around 4 feet above the ground. However, if you or anyone in your family is taller or shorter than average, you might need to modify the height of the shower valve.

This post will discuss choosing the correct shower valve height under different circumstances, factors to consider when installing shower valves, and different types of shower valves.

What Is the Standard Shower Valve Height?

What Is the Standard Shower Valve Height?

A shower valve is a device that controls the flow of water to a shower head. The standard shower valve height is 38 to 42 inches. This is a comfortable height for most people and provides enough pressure for an enjoyable showering experience.

NOTE: It's important to note that different shower valve heights will be needed in varying circumstances.

Below are a few tips that’ll help you decide on an ideal shower valve height:

  • Installing a shower valve higher than the standard height may be necessary if you have a high ceiling or taller people in your home.
  • When installing a ceiling-mounted shower valve, you’ll need to measure from the ceiling down to the bottom of the valve.
  • Shower valve height from the floor can be measured by standing with your hands to the side and measuring the distance from your elbow to the floor.
  • When installing a shower valve on the side of a bathtub, you’ll need to measure from the floor up to the desired level.

Shower Head vs. Shower Valve

A showerhead is the part of the shower that emits water. It is typically attached to a hose that leads to the shower valve. The standard shower head height is 72 to 80 inches. Although this is the industry standard, it’s important to remember that different heights may be required in certain circumstances.

The shower valve controls water flow to and from the showerhead via a handle or knob. The height of the shower valve should always be placed lower than the height of the showerhead. This ensures an optimal pressure of water and height for showering comfort.

How Much Distance Should Be Between Shower Head and Valve?

A shower valve should be installed at half the distance between the head and the floor. For example, if the total distance is 80 inches, the shower valve should be installed 40 inches from the floor.

This leaves enough space for comfortable access and adequate pressure from the showerhead.

Furthermore, it ensures enough room to comfortably manipulate the valve and adjust the water pressure without reaching up or down dangerously.

Factors to Deciding Correct Shower Valve Height

Determining the right shower valve height is easy. You need to know the basics, and you’re good to go. Below are factors you can consider while deciding the right shower valve height:

  1.  Type of shower/bathroom

The shower type in your bathroom will determine the best height for the shower valve. If it’s a stand-up shower, measure from the floor to get an accurate measurement. If it’s a tub/shower combination, measure from the tub deck instead.

In addition, different shower types will require different types of valves. For example, adjustable valves are better suited for stand-up showers, while a thermostatic valve is best for tub/shower combinations. Therefore, purchasing the correct valve for your shower type is best to ensure safety and functionality.

  1.  Body height

The average person stands around 5’10”. If there are taller people in your household, it’s best to adjust the shower valve height accordingly. The idea is to have a comfortable reach, so it’s essential to consider all household members.

Moreover, if you have any family members with physical challenges, you may need to adjust the shower valve height even further for safety and convenience.

TIP: Ask a family member to hold the shower head while you stand in the place to shower. Next, measure the distance between their elbow and the shower head. This will give you an accurate measurement of the ideal valve height for your family.
  1.  Local Plumbing Codes

There are local codes for installing plumbing fixtures in certain areas. Some of these codes require that the shower valve be installed at a certain height, so it’s essential to consult your local plumbing codes before starting your project.

Follow the manufacturer’s instructions for proper installation and make sure you comply with all local codes regarding placement, venting, and drainage. Doing so will ensure a safe and comfortable showering experience.

NOTE: If you do not have an experience with plumbing, we do not recommend installing the shower valve yourself. It can lead to severe water damage or may cost future repairs if done incorrectly. Hence, it is best to hire a professional.

Different Types of Shower Valves

There are a few different types of shower valves available on the market. The type you choose will depend on the specifics of your bathroom, budget, and preferences. Common types include:

  • Thermostatic valve – This shower valve is designed to maintain constant water temperature, making it a safer option for families. It is primarily digital and comes with a temperature display.
  • Pressure-balanced valve – It is designed to maintain even water pressure by balancing hot and cold water flows. It’s especially beneficial for households with low water pressure or spotty temperature levels.
  • Mixing Valve – A mixing valve allows you to adjust the water temperature while showering. It is usually located on the showerhead and can be adjusted by turning a knob or lever.
  • Diverter Shower Valve – This type of valve switches between a handheld shower and a regular showerhead. The pressure-balanced diverter valve ensures that the water pressure remains constant regardless of which fixture you use.

What Is the Standard Height for a Walk-in Shower Valve?

The standard height for a walk-in shower valve is 42 inches or higher above the floor. However, if you have taller family members, it’s best to adjust the height for comfortable use.

What Determines the Distance Between Shower Fittings?

The distance between shower fittings is typically determined by local plumbing codes. They will indicate the minimum space required between the faucet and other fixtures such as the showerhead, body jets, handheld showers, rainfall heads, etc. Make sure to read your local building codes before starting your project.

What Is the Difference Between a Shower Valve and a Trim?

A shower valve controls water flow and temperature, while the trim is a decorative cover that goes over the valve. The trim includes handles and other visual elements that make it easier to operate the device. It also helps enhance the look of your bathroom.

What Is the Standard Height of a Rain Shower Head?

The standard height for a rain shower head is 8 to 9 feet above the floor. However, you can adjust the height of your rain shower head as needed and according to local plumbing codes. It’s best to consult with an experienced plumber before making any changes.

What Is the Standard Height for a Bathtub Shower Valve?

The standard height for a bathtub shower valve is 36 inches or higher above the tub deck. Once again, adjust to your specific needs from the floor. However, this varies depending on the type of shower and body heights of those using it.